I made a page about it, CLICK HERE
I made a page about it, CLICK HERE
Here’s a picture of it being dipped in clear Shellac; more information can be seen at a page on this site
I made a page at this site, describing what a log dog is, and how I made it. You can see it HERE.
I made this wood fence for one of my daughter’s gardens. It’s made of pressure treated wood, and painted with Latex paint. I made a jig to assemble the 8 foot long sections quickly. Thta part is very fast; the slow part is cutting the strips form a 2 X 4. Afterward, I found a company that sells them for 99c each. A good 2 X 4 is about $5, and it would take 7 of these strips to make an 8 foot long section. If you cut them yourself, you will have a board remaining, which is good for making stakes. The ones I made are painted black in the picture. They’re cut with a single cut/bevel, which is a mistake; as the stake travels when you drive it with a hammer.
Also, it would probably be good to draw out a big circle, if that’s the shape you want to make. I merely started at one end, and laid it out as I went. I had to go back and make a lot of adjustments.
Considering how long it takes to rip them yourself, that’s a bargain. here’s a LINK to the company, but I haven’t tried them yet. I used Gorilla Glue’s wood glue, not the regular formula. I also drove a nail at every joint, with a nail gun. If you drive them at an angle. it works much better. The fence pieces are 15.5 inches tall.
The first picture is of the plot. It always looks great when all her flowers bloom; I hope the fence will make it all look better.the next picture is the fence as you face the neighbor’s barn.Here it is as you face the house.Here’s the jig I made to speed up assembly time. It works really well. I’m not sure if it will work with the slats from the supplier.
It will be fun selling scarecrows at Q & B, and probably as a part of upcoming promotions. I have him listed online as “Well fed scarecrow”.
I’m fascinated with certain kinds of architecture; here’s an example. This old building is in Sevierville Tennessee. From the angle in the first picture, it looks like a building that’s out by the ocean. I’m not sure why it looks that way to me, but we’re a couple hundred miles from the ocean. It appears that it was once a store, with a residence above.
The first picture isn’t on glass, but it’s similar to other work I’ve seen in this area, probably the same artist. This piece was at the Sevier County Fairgrounds, about 5 years ago, and might as yet be stored there. The characters depicted on it look like the ones on the windows of the Thrifty Center, a store on Chapman Highway, in South Knoxville, near Seymour. Those windows have since been changed, and the characters are gone; but if anyone knows about the artist, any other locations of his work, or has pictures, please contact me. I want to duplicate the style on some projects.
The second picture is from Uncle Easy’s Pawn, also on Chapman Highway. Those window advertisements are still there, as of writing this. I’m wondering if they’re both rendered by the same guy.
I had this wooden building given to me a while back, but haven’t worked on it until today. I was told that it’s a WW2era national Guard portable building. At this point, it’s an important part of future plans, and it will be fun making all that happen.
In the picture, the building is tilted, because I’ve slowly lifted that side. It will need to go high enoughto get a trailer underneath it.
Update: The building has been moved, painted, and steps added. You can see all that HERE.
Over the years, I’ve given timber tool demonstrations; at a major theme park in Pigeon Forge Tennessee, a pioneer settlement in Dandridge Tn, a three day tractor show in Louisiana, and at Ramsey House near Knoxville Tn.
I’m going to be looking for a location to put on the show for ticket sales; somewhere near Sevierville Tn. The show is informative, and even entertaining. I demonstrate how non motorized timber tools were used. That includes the Froe for shingle making, the Crosscut Saw for cutting logs in sections, the Cant Hook for rolling logs, the Drawknife for shaping and removing bark, Wedges, Gluts, and a Maul for splitting fence rails, an Axe, Broadaxe, and Foot adze for hewing a log, a Pit Saw for cutting lumber from a log.
Also, I give a small talk about how the pioneers used various local woods. There is a lot to see, hear, touch, and smell. If you’re interested in booking me at your location, give me a call at (865) 360-4351. Thank you.
This is the site of Quill and Blade, the Donahue Family establishment. We make and sell things for your home and work. We use historic methods for many of our day to day chores. Our goal is to sell quality products, while helping you explore, experience and preserve our western heritage.